Panasonic KX-NS1000 - 5.6.5 Simple Network Management Protocol (SNMP) System Monitor

Programming Manual References
13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message
Feature Manual References
5.1.10 DISA (Direct Inward System Access)
DISA—Mute & OGM Start Timer after answering
Specifies the length of time until the caller hears an OGM after reaching the DISA line.
Default
1.8
Value Range
0.0–12.0 s
Maintenance Console Location
10.3 PBX Configuration
—[2-3] System—Timers & Counters
Programming Manual References
13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message
Feature Manual References
5.1.10 DISA (Direct Inward System Access)
DISA—No Dial Intercept Timer
Specifies the length of time after the OGM finishes playing in which the caller must begin dialing before the
call is redirected to the operator.
Default
10
Value Range
0–120 s
Maintenance Console Location
10.3 PBX Configuration
—[2-3] System—Timers & Counters
Programming Manual References
10.2 PBX Configuration—[2-2] System—Operator & BGM
13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message
14.6 PBX Configuration—[6-6] Feature—Tenant—
Operator (Extension Number)
Document Version 2016-03 PC Programming Manual 499
10.3 PBX Configuration—[2-3] System—Timers & Counters