Panasonic KX-NS1000 - 5.6.6 Dynamic Host Configuration Protocol (DHCP) Assignment

DISA—Disconnect Timer after Intercept
Specifies
the length of time that an intercepted DISA call rings at the intercept routing destination before being
disconnected.
Default
60
Value Range
0–60 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Programming Manual References
13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message
Feature Manual References
5.1.10 DISA (Direct Inward System Access)
DISA—CO-to-CO Call Prolong Counter
Specifies the number of times that the caller can prolong a CO
-to-CO line call on a DISA line. (Selecting "0"
enables the caller to prolong the CO-to-CO line call without restriction.)
Default
10
Value Range
0–15
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Programming Manual References
13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message
Feature Manual References
5.1.10 DISA (Direct Inward System Access)
DISA—CO-to-CO Call Prolong Time
Specifies the length of time that a CO-to-CO line call on a DISA line is prolonged each time that the caller
prolongs the call. (Selecting
"0" prevents the caller from prolonging the CO-to-CO line call.)
Default
3
Document Version 2016-03 PC Programming Manual 501
10.3 PBX Configuration—[2-3] System—Timers & Counters