Panasonic KX-NS1000 - Page 562

Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main— COS
12.2.1 PBX Configuration—[4-2-1] Extension
—Portable Station—Extension Settings—Main—
COS
Feature Manual References
4.1.11 CALL WAITING FEATURES
22.1.5 Whisper OHCA
Transfer to busy Extension w/o BSS Operation
Enables a transferred call to be queued when the transfer destination is busy.
Default
Disable
Value Range
Disable:
The call is not transferred. (If the transfer destination has enabled the call waiting notification feature,
it is possible to inform the destination about the call transfer.)
Enable: The transferred call is queued for the time period specified in
Recall—Transfer
Recall in 10.3 PBX
Configuration—[2-3] System—Timers & Counters.
Maintenance Console Location
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone—
Recall—Transfer
Recall
Feature Manual References
4.1.10 Call Transfer
Automatic Answer (Caller)
Enables a caller to have calls automatically answered when the destination has set Hands
-free Answerback.
Default
Enable
Value Range
Disable: Even if the destination has set Hands-free Answerback, the call will not be automatically answered.
Enable: The call will be automatically answered.
Maintenance Console Location
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
562 PC Programming Manual Document Version 2016-03
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings