Panasonic KX-NS1000 - Page 565

Maintenance Console Location
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
Feature Manual References
4.1.22 COS (Class of Service)
Group Forward Set
Enables setting call forwarding for calls to an incoming call distribution group.
Default
Enable-Group
Value Range
Disable: An extension cannot set call forwarding for any group.
Enable-All
: An extension can set call forwarding for all groups.
Enable-Group: An extension can only set call forwarding for the group to which the extension belongs.
Maintenance Console Location
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
Programming Manual References
11.5.1.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Member
List
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main— COS
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Main— COS
Feature Manual References
7.1.6 FWD (Call Forwarding)
PT Programming Mode
Specifies the level of authorization for performing PT programming.
Default
COS No.1–63: Enable
COS No. 64: Disable
Value Range
Disable: A PT user cannot perform any programming.
Enable: A PT user can perform only personal programming.
Maintenance Console Location
10.7.1 PBX Configuration—[2-7-1] System—Class of Service
—COS Settings
Document Version 2016-03 PC Programming Manual 565
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings