Panasonic KX-NS1000 - Page 579

Call Back—Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for callback ringing by Automatic Callback Busy.
Default
S-Double
Value Range
Single, Double
, Triple, S-Double, Option 1, Option 2
Maintenance Console Location
10.8.3 PBX Configuration—[2-8-3] System—Ring Tone Patterns—Call from Others
Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 1—
Ring
Pattern Table
12.2.1 PBX Configuration—[4-2-1] Extension
—Portable Station—Extension Settings—Option 1—
Ring
Pattern Table
Live Call Screening—Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for LCS warning tones.
Default
Triple
Value Range
Single, Double
, Triple, Option 1, Option 2
Maintenance Console Location
10.8.3 PBX Configuration—[2-8-3] System—Ring Tone Patterns—Call from Others
Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 1—
Ring
Pattern Table
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 1— Ring
Pattern Table
External Sensor—Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for calls from an external sensor.
Default
Triple
Value Range
Single, Double
, Triple, Option 1, Option 2
Document Version 2016-03 PC Programming Manual 579
10.8.3 PBX Configuration—[2-8-3] System—Ring Tone Patterns—Call from Others