Panasonic KX-NS1000 - Page 586

Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
10.9 PBX Configuration
—[2-9] System—System Options
Feature Manual References
17.1.2 Ring Tone Pattern Selection
PT Operation—Automatic Answer for Call from CO after
Specifies the number of times a PT in Hands
-free Answerback mode will ring before a conversation is
established automatically when it receives a call from a CO line.
Default
1 Ring
Value Range
No Ring, 1 Ring, 2 Rings, 3 Rings
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Manual References
9.1.1 Hands-free Answerback
PT Operation—Automatic Hold by ICM / CO / ICD Group Key
Selects
whether calls are disconnected or held when an INTERCOM, PDN, CO, or ICD Group button is pressed
while having a conversation.
Default
Disable (Disconnect)
Value Range
Disable (Disconnect), Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Programming Manual References
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
586 PC Programming Manual Document Version 2016-03
10.9 PBX Configuration—[2-9] System—System Options