Panasonic KX-NS1000 - Page 681

Programming Manual References
9.7 PBX Configuration—[1-1] Configuration—Slot—UM Port Property
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Intercept
Destination— Intercept Destination—When called party does not answer—Day, Lunch, Break, Night
12.2.1 PBX Configuration—[4-2-1] Extension
—Portable Station—Extension Settings—Intercept
Destination—
Intercept Destination—When called party does not answer—Day, Lunch, Break, Night
Feature Manual References
20.1.2 UNIFIED MESSAGING FEATURES—UM Ports and the UM Group
Overflow to Mailbox for Call to ICD Group
Enables
the PBX to send the mailbox number of the called extension to the UM when a call is redirected from
an incoming call distribution group to the UM group by Intercept Routing. When the Unified Messaging system
receives the mailbox number, it answers the call with the appropriate mailbox.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
11.7.1 PBX Configuration—[3-7-1] Group—UM Group—System Settings
Feature Manual References
10.1.2 ICD Group Features—Group Call Distribution
Transfer Recall to Mailbox
Enables the PBX to send the mailbox number of the transfer destination extension to the Unified Messaging
system in these situations: (1) when a call is transferred to an extension by the Call Transfer without
Announcement
feature using the Automated Attendant (AA) service of the Unified Messaging system, and the
call is not answered within a programmed time period; (2) when the Unified Messaging system is assigned as
the Transfer Recall destination of a certain extension. When the Unified Messaging system receives the
mailbox number, the Unified Messaging system answers the call with the appropriate mailbox.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
11.7.1 PBX Configuration—[3-7-1] Group—UM Group—System Settings
Document Version 2016-03 PC Programming Manual 681
11.7.1 PBX Configuration—[3-7-1] Group—UM Group—System Settings