Ability to Talk
Enables PT, SLT and PS users to use the push-to-talk feature during a conference group call, when
Broadcast Mode is set to "Enable". The push-to-talk feature allows PT, SLT and PS users to speak during
the call by pressing any of their dial keys.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
11.9 PBX Configuration
—[3-9] Group—Conference Group
Programming Manual References
11.9 PBX Configuration—[3-9] Group—Conference Group—
Broadcast Mode
Feature Manual References
4.1.19 Conference Group Call
Automatic Answer w/o Extension Setting
Specifies if the extensions of the conference will automatically answer a conference group call, even if
Hands-free Answerback is not set for those extensions. This setting can be used with PTs and
KX-WT125/
KX-TCA185/KX-TCA285/KX-TCA385 PSs.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
11.9 PBX Configuration—[3-9] Group—Conference Group
Programming Manual References
11.9 PBX Configuration—[3-9] Group—Conference Group—
Broadcast Mode
Feature Manual References
4.1.19 Conference Group Call
692 PC Programming Manual Document Version 2016-03
11.9 PBX Configuration—[3-9] Group—Conference Group
To Next Page
Loading...
