Panasonic KX-NS1000 - Page 705

Default
Current port type
Value Range
DPT: DPT port (DLC)
SLT: SLT port (SLC/MSLC/CSLC/MCSLC/EMSLC)
S-Hybrid: Super Hybrid port (DHLC)
S-Hybrid(SLT): XDP port of Super Hybrid port (DHLC)
S-Hybrid(S-DPT): Digital XDP port of Super Hybrid port (DHLC)
DPT(S-DPT): Digital XDP port of DPT port (DLC)
ISDN: ISDN port (PRI)
OPX: T1-OPX port (T1)
IP-EXT: IP-Extension port (V-IPEXT)
SIP: General SIP Extension port (V-SIPEXT)
SIP-MLT: KX-UT series SIP phone Extension port (V-UTEXT)
UM: Unified Messaging System Extension port
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Telephone Type
Indicates the type of telephone connected to the extension port
(reference only).
Default
Current connected telephone type
Value Range
DPT (Other)/DPT (T76xx/DT): DPT is connected.
APT: APT is connected.
DSS: DSS Console is connected.
VM: VPS is connected.
ISDN-Extension: ISDN telephone is connected.
OPX: T1-OPX port (T1)
CS: CS is connected.
IP-PT: IP-PT belonging to the V-IPEXT card is connected.
P-SIP: Panasonic SIP Phone is connected.
UT: KX-UT series SIP phone is connected.
SIP: General SIP Extension is connected.
CS-M: High-density CS is connected with its master port.
CS-S1–3: High-density CS is connected with its slave port.
FAX: Fax Extension
No Connection: No telephone is connected.
UNKNOWN: SLT is connected (or no telephone is connected to the Super Hybrid or SLT port).
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Document Version 2016-03 PC Programming Manual 705
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings