Panasonic KX-NS1000 - Page 719

Default
Disable
Value Range
Display & Tone1, Display & Tone2, Display & Tone3, Display only, Disable
Note
• Supported terminals are: DPT, DPT (S-DPT), S-Hybrid, S-Hybrid (
S-DPT), IP-EXT
• Depending on system programming, the number of terminals may be limited to 256. For more
information, consult your dealer.
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Feature Manual References
4.1.8 Call Pickup
Executive Override Deny
Specifies whether calls can be interrupted by other extensions.
Default
Disable
Value Range
Disable: Allows other extension users to interrupt an existing call
Enable: Prevents other extension users from interrupting an existing call
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension
—Wired Extension—Extension Settings
Feature Manual References
6.1.7 Executive Busy Override
Absent Message
Specifies the Personal Absent Message which, unlike the System Absent Message, can be customized for
each extension.
Default
Not stored
Value Range
Max. 16 characters
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension
—Wired Extension—Extension Settings
Document Version 2016-03 PC Programming Manual 719
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings