Panasonic KX-NS1000 - Page 724

Incoming Call Display
Selects which caller information is shown on the first line of the extension
’s display.
Default
Caller ID Name
Value Range
Caller ID Name, CO Line Name, DDI/DID Name
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Feature Manual References
5.1.11 Display Information
Automatic LCD Switch when Start Talking
Enables the first line of the display to show the call duration automatically after answering a CO line call.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension
—Wired Extension—Extension Settings
Feature Manual References
5.1.11 Display Information
Key Pad Tone
Specifies whether key pad tones are heard when dialing.
Default
On
Value Range
Off, On
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension
—Wired Extension—Extension Settings
724 PC Programming Manual Document Version 2016-03
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings