Panasonic KX-NS1000 - Page 788

Default
15
Value Range
0–120 s
Maintenance Console Location
12.2.1 PBX Configuration—[4-2-1] Extension
—Portable Station—Extension Settings
Programming Manual References
12.2.2 PBX Configuration—[4-2-2] Extension—Portable Station—FWD/DND
Feature Manual References
7.1.6 FWD (Call Forwarding)
Keep ring after FWD NA to CO
Specifies whether a PS continues to ring after forwarding an incoming call to an outside destination via
FWD
N/A or FWD Busy N/A.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
Programming Manual References
12.2.2 PBX Configuration—[4-2-2] Extension—Portable Station—FWD/DND
Feature Manual References
7.1.6 FWD (Call Forwarding)
Remote FWD COS
Specifies the COS that allows the FWD setting on the extension to be changed from another extension. This
COS must then be set for the extensions that will remotely change the FWD setting.
Default
Disable
Value Range
Disable, 1–512
788 PC Programming Manual Document Version 2016-03
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings