Feature Manual References
18.1.9 Speed Dialing, Personal
18.1.10 Speed Dialing, System
19.1.2 Tenant Service
Time Service Mode
Specifies
which PBX’s clock in a One-look network is used as reference for the tenant’s Time Service functions
and for ICD Group functions.
Default
Normal
Value Range
Normal: Use the clock of the PBX to which the device or CO line for a service (e.g., incoming call features) is
connected.
1–16: Use the clock of the PBX in the One-look network with the selected Site ID.
Maintenance Console Location
14.6 PBX Configuration—[6-6] Feature—Tenant
Feature Manual References
19.1.2 Tenant Service
19.1.3 Time Service
Extension Directory
Specifies
whether the display for the Speed Dialing numbers is for the entire system, or only for the extensions
of the tenant group that the extension belongs to.
Default
System
Value Range
System: All system Speed Dialing numbers are displayed.
Tenant: Only the extensions of the tenant group that the extension belongs to are displayed.
Maintenance Console Location
14.6 PBX Configuration—[6-6] Feature—Tenant
Feature Manual References
18.1.9 Speed Dialing, Personal
18.1.10 Speed Dialing, System
19.1.2 Tenant Service
Document Version 2016-03 PC Programming Manual 843
14.6 PBX Configuration—[6-6] Feature—Tenant
To Next Page
Loading...
