Panasonic KX-NS1000 - Page 890

Value Range
DIL: Distribution depends on the CO line through which the calls arrive
DDI/DID: Distribution depends on the DID number of the calls
Maintenance Console Location
18.2 PBX Configuration
—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Manual References
10.1.11 INCOMING CALL FEATURES
5.1.7 DID (Direct Inward Dialing)
DDI/DID/TIE—Remove Digit
Specifies the number of leading digits to be removed from the incoming called number for DID distribution or
for TIE line service.
Default
0
Value Range
0–15
Maintenance Console Location
18.2 PBX Configuration
—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Manual References
5.1.7 DID (Direct Inward Dialing)
15.1.12 PRIVATE NETWORK FEATURES
DDI/DID/TIE—Additional Dial
Specifies the number to be added to the incoming called number in the place of the removed digits for DID
distribution or for TIE line service.
Default
Not stored
Value Range
Max. 8 digits (consisting of 0–9, *, and #)
Maintenance Console Location
18.2 PBX Configuration
—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Manual References
5.1.7 DID (Direct Inward Dialing)
890 PC Programming Manual Document Version 2016-03
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings