Panasonic KX-NS1000 - Page 958

Value Range
Date and time
Maintenance Console Location
20.1.2 UM Configuration
—[1-2] Mailbox Settings—Full Setting—External MSG Delivery/Auto FWD/Personal
Custom Serv
Feature Manual References
20.1.4 Unified Messaging—Auto Forwarding
Personal Custom Service
Specifies the Personal Custom Service. The System Administrator can assign an operation to each key.
Note
• These settings can be changed by subscribers.
• Make sure to add a CO line access number when you store an outside telephone number.
• When the Unified Messaging system calls a CO line via the PRI card, be sure to add
"#" after the
telephone number (1112223333 in the example here): 9P1112223333#PP123PP456PPX# (P: Dial
Pause)
Follow the steps below to edit a Personal Custom Service.
1. Click Edit.
2. For each Key, specify an Assigned Operation.
3. For each Assigned Operation that is specified, specify a Value
4. Click OK when finished.
Assigned Operation
• Transfer to specified mailbox: Allow the caller to leave messages in a specified mailbox.
• Transfer to specified extension: Transfers the caller to a specified extension.
• Transfer to Voice Mail Service: Allows the caller to access Voice Mail Service.
• Transfer to Automated Attendant Service: Allows the caller to access Automated Attendant Service.
• Transfer to specified Custom Service Menu: Transfers the caller to the Custom Service specified here.
• Transfer to operator: Connects the caller to an operator.
• Transfer to outside (specified number): Transfers the caller to a specified outside telephone number.
Enter a number from the Outside Numbers list (1–4).
• Page the party: Pages the subscriber.
• Repeat greeting: Repeats the greeting.
• None: No operation assigned.
Default
[0] : Transfer to Operator
Others : None
Value Range
• Transfer to specified mailbox: 2–[the value set in
Mailbox No. Max. Length (3-8)] digits
• Transfer to specified extension: 2–8 digits
• Transfer to specified Custom Service Menu: 1–200
• Transfer to outside (specified number): Outside Number 1–4
958 PC Programming Manual Document Version 2016-03
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting