Feature Manual References
20.1.75 Unified Messaging—Remote Call Forwarding Set
Auto Login Extension
When this item is set to "Enable", subscribers are able to access their mailbox directly without entering the
mailbox number. Subscribers can automatically log in from their extensions, by calling from an outside
telephone whose number is stored as a Caller ID number, or by dialing a telephone number assigned to a
specified DID number or CO line. When logging in from outside telephones, the Toll Saver feature is also
available.
Default
Enable
Note
The default value for mailbox 999 is
"Disable".
Value Range
Disable, Enable
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Remote Call/Automatic Login/Direct Service
Feature Manual References
20.1.8 Unified Messaging—Automatic Login
Auto Login Extension Password Entry Requirement
Specifies if a password is required for the Automatic Login Extension feature.
Notice
If this is set to "No", ensure that unauthorized third-parties are not allowed access to that mailbox.
Default
Yes
Value Range
Yes, No
Maintenance Console Location
20.1.2
UM Configuration—[1-2] Mailbox Settings—Full Setting—Remote Call/Automatic Login/Direct Service
Feature Manual References
20.1.8 Unified Messaging—Automatic Login
962 PC Programming Manual Document Version 2016-03
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting
To Next Page
Loading...
