Panasonic KX-NS1000 - Page 991

PC Programming Manual References
24.4 UM Configuration—[5-4] System Parameters—Parameters—Intercom Paging Parameters
Use Call Waiting on Busy
If
set to "Yes", the system signals subscribers in the Class of Service when they are on a call and another call
is received.
Note
This setting is not available for COS 513
(Message Manager).
Default
No
Value Range
No, Yes
Maintenance Console Location
21.1 UM Configuration—[2] Class of Service—Call Transfer
Caller ID Screen
If
set to "Yes", subscribers in the Class of Service can hear the pre-recorded names of callers when they receive
calls (Caller ID Screening).
Note
This setting is not available for COS 513
(Message Manager).
Default
Yes
Value Range
No, Yes
Maintenance Console Location
21.1 UM Configuration—[2] Class of Service—Call Transfer
Feature Manual References
20.1.20 Unified Messaging—Caller ID Screening
Notify of Transfer
If set to "Yes", subscribers in the Class of Service will hear "You have a call
." when they answer transferred
calls.
Default
No
Document Version 2016-03 PC Programming Manual 991
21.1 UM Configuration—[2] Class of Service