Pentair INTELLICENTER User Manual

IntelliCenter Control System User’s Guide
94 |
Setup Wizard [Advanced System Configuration] Outdoor control panel only
Initial System Power Up
First Time Setup: After all required pool/spa equipment has been connected to
the IntelliCenter Control System, apply power to the system at the main panel
circuit breaker. Upon the initial system power up, the outdoor LCD control panel
will display the PENTAIR END USER LICENSE AGREEMENT. Please read this
agreement. To continue, tap the Down arrow on the right side of the screen to
scroll down to the end of the agreement and tap I Accept to accept the agreement.
The Home screen is then displayed.
Note: The Pentair End User License Agreement is displayed only one time after
the initial system power up.
I Accept
PENTAIR END USER LICENSE AGREEMENT
IntelliCenter Control System
Note: After you tap I AGREE on the
Pentair End User License Agreement the
IntelliCenter™ Control System Wizard
dialog is displayed.
Import a System Configuraon?
Import Configuraon?
YES
Cauon! If you import a system configuraon
file, this opon will overwrite the current
configuraon.
Help/ Back/
Next/
Menu Home
Summary
Exit
Wizard
Import System Configuration:
Yes: Use this option to Import a system
configuration file (.CFG) from a USB
device plugged into the USB Port on
the front of the IntelliCenter Control
System Outdoor control panel. Note:
This option will overwrite the current
system configuration.
No: Tap No then Next to continue with
the Setup Wizard.
Setup Wizard (First Time Setup): To start the Setup Wizard for the first time, from
the Home screen, tap Settings > Advanced System Configuration > Wizard. The
following screen is displayed:.
Help/
Exit
Next
IntelliCenter™ Control System Setup
Welcome!
The IntelliCenter™ Control System Setup Wizard
will guide you through the system
configuraon for your pool/spa equipment.
Firmware version 1.0
Menu
Wizard
IntelliCenter Control System Setup
Wizard: The first Setup Wizard
configuration screen, Displays the
current system firmware version.
Help/Menu: Tap to display the Help
text. Tap hold and release to display the
Wizard MAIN MENU options.
Exit Wizard: Tap this button to exit the
Setup Wizard and return to the Home
screen.
Next: Tap Next to continue with the
Setup Wizard and display the Detected
Hardware screen.
Continue to next page.

Pentair INTELLICENTER Specifications

General

Expandable	Yes
Energy Management	Yes
Touchscreen Display	Yes
Remote Access	Yes, via Mobile App
User Interface	Touchscreen
Remote Monitoring	Yes
Number of Circuits	Up to 40
Wireless Connectivity	Yes
Power Requirements	120V AC
Enclosure Rating	NEMA 3R