IntelliFlo VF Settings: Pump Type, Pump Name, Pump Address,
Min. Flow (15 GPM), Max. Flow (130 GPM), and Step Size (1-10 GPM). For
information about priming the pump, see page 70.
Minimum Flow (GPM): The pump's minimum flow rate can be set from 15-130.
This is the minimum flow rate speed but still generating sufficient flow in the pool.
The IntelliCenter™ Control System will not run lower than 15 GPM. The lower you
can establish this flow rate the better the energy savings.
Maximum Flow (GPM): The pump's maximum flow rate can be set from 15-130
GPM. This is generally the flow rate required for backwashing the pool filter. The
pump will not allow a higher flow rate of 130 in order to prevent damage to the
pool system.
Step Size (GPM): The pump flow rate step size can be set from 1-10 GPM.
Pumps (IntelliFlo
®
VF)
+ Add Pump: To add an IntelliFlo VF pump, tap + Add Pump to access the
pump type screen and select IntelliFlo VF.
Pump Type: To change the pump type
(function), tap Pump Type button to
access the pump type screen. Select
the pump for the list. Tap Check to save
the new pump type and return to the
previous screen.
Pump Name: Tap the Pump Name
button and enter the name of the pump.
Tap Check to save the name and return
to the previous screen.
Pump Address: Assign the pump
address from 1-16.
To Next Page
Loading...
Need help?
General
