Advanced System Configuration (Settings)
Advanced System Configuration Options Summary:
Installation Setup: Configure the IntelliCenter
™
Control System system. Body
Configuration (page 53). Circuits (page 56), Pumps (page 62), Heaters
(page 72), Valves (page 76) , Chemistry (page 78).
Remotes Setup: Add Spa-Side Remote: Select Spa Command, iS4, iS10, or
QuickTouch Spa-Side Remote. See page 80.
Network and WiFi Setup: Configure wireless network (SSID, Ethernet).
IntelliCenter Wireless Remote Setup: Configure Ethernet, Connect to a Wireless
Network (SSID), Test Internet Connection and Reboot WiFi Device. See page 84.
IntelliCenter Wireless Remote Setup: Set up the wireless remote. See page 86.
Delays: Valve delay settings, Heater Cool Down ON/OFF, Freeze cycle time (min),
Spa Freeze override (mins) settings. See page 87.
System: System Information, Detected Hardware, Firmware update. See
page 88.
Import / Export: Import System Configuration, Export System Configuration,
Export Status Logs, Export Historical Data, Export Debug Data. See page 89.
Restore Factory Defaults: Overwrite the current system configuration with the
default factory settings. Follow the screen prompts. See page 91.
Setup Wizard: Configure the system using the step-by-step setup wizard assistant.
See page 92.
Notice: The Advanced System Configuration settings may affect the systems
pool and spa operations. Before making changes be sure you have the latest
system settings backed up to a memory stick, see Settings > Advanced System
Configuration > System. See page 88 for details.
To Next Page
Loading...
Need help?
General
