IntelliCenter Control System User’s Guide
| 7
Home Screen (see page 8)
Pool Screen
Spa Screen
Features (Individual/Groups)
Lights ((Individual/Groups)
Schedule (Pump schedule)
Usage
Chemistry (IntelliChem
®
Controller/IntelliChlor
®
SCG)
Status
Settings (see page 35)
Service Mode
Vacation Mode
Support
General: Location, Date & Time, Units (Fahrenheit/Celsius), Features
and Lights List Order, General List Order, Backlight (Deep Sleep: Wireless
Control Panel only, Temperature Sensor Calibration, Day / Night Themes,
Manual Operation Priority, Manual Heat, Chemistry Readings Badge, Badge
Colors.
Alerts and Notifications: Choose which system status, alerts and warnings
badges to display on the Home screen Status icon.
Security (Passcode Protect)
Pentair User Portal (intellicenter.com)
Groups: Configure groups of AUX circuits, Light circuits and Feature circuits.
System Reboot: Reboot the panel
Advanced System Configuration (see page 52)
Installation Setup:
Body Configuration,Circuits, Pumps, Heaters, Valves,
Chemistry, Pool/Spa Cover.
Remotes Setup: iS4, QuickTouch II, iS10, SpaCommand remotes
Network and WiFi Setup: Configure Ethernet, Connect to a Wireless
Network, Adjust Wireless Transmit Power, Internet Connection Test,
Reboot WiFi Device.
IntelliCenter Wireless Remote Setup: Configure the Address and Panel #
for wireless remote.
Delays: Valve Delay, Heater Cool Down, Freeze Cycle Time (min), Spa Freeze
Override (min), Override Delays.
System: System Information, Detected Hardware, System Diagnostic
Information, Firmware Update (Update from Panel, Update from USB,
Update from Ethernet), Factory Diagnostics.
Import/Export: Import System Configuration, Export System Configuration.
Restore Factory Defaults: Restore system to factory configuration.
Setup Wizard: Step-by-step system configuration.
IntelliCenter™ Control System Menu
To Next Page
Loading...
Need help?
General
