IntelliCenter Control System User’s Guide
48 |
The Groups feature allows multiple Light circuits and AUX circuits to be
grouped together and assigned to one ON/OFF button that is displayed on the
Home screen Lights Groups screen. Up to 40 groups of light circuits and AUX
circuits can be assigned. Go to Settings > Groups to add a group of circuits. Note: A
group of Light Circuits or AUX Circuits can be switched ON/OFF from one button in
the Features/Groups screen, and the Lights/Groups screen.
Groups (Lights/Circuits) (Settings)
Light Group
Circuit Group
+Add Group (Lights or Circuits): Tap
Add Group, and select either a Light
Group or Circuits Group.
Light or Circuits (Group Settings):
Group Name: Tap the name button to
access the keyboard. Enter a name for
the group of lights or circuits.
Included Lights or Circuits: Tap the
Included Lights (or Circuits) button
to access the available circuits. The
circuits displayed depend on the model
of the Personality Card installed. Light
circuits (AUX circuits) are assigned in
the AUX circuits screen.
Egg Timer: Tap the Egg Timer button to
display the Hours and Minutes button.
Tap the Hours and Minutes button to
select a manual time-out from 0 to 23
hrs. 59 mins. for the circuit. The Egg
Time is a specified time delay (hrs/
mins) for the circuit, once it is turned
on manually.
Don't Stop: Tap the Hours button
until 23 hours is displayed, then tap
the button again to display Do Not
Stop. The Do Not Stop feature will
continuously run the circuit until the it
is manually turned off.
3Included Circuits
Night GroupGroup Name
5hr. 0min.Egg Timer
From the AUX Circuits (4 Dots Icon),
you can also create a group of light
circuits and AUX Circuits. Go to
Advanced System Configuration >
Installation Setup > Circuits > AUX
Circuit (page 56) and Feature
Circuits (page 58).
To Next Page
Loading...
