System [Advanced System Configuration]
System: Displays the system firmware version: Version 1.010. Tap System
Information to display MAC Address, Serial Number, Manufacturer Date, Firmware
Version, IP Address and Release Notes.
Release Note: Information about the current system firmware release.
Run Time: 2888 seconds
ACK (Pumps) 8/9
ACK (iChlor) 8/9
ACK (iChem) 8/9
ACK (UTemp) 8/9
ACK (others) 8/9
Slot Time 0
System Time: Sat Nov 11 00:51:06 2017
Days Offset: 0 days
Minutes Offset: 0 minutes
Frz Status: 1
System Diagnoscs
Current Firmware: v.1.0
firmware to a newer or earlier version.
Update from Panel
Update from USB
Check for Update
Check for Update: Tap this button to
check for the latest IntelliCenter™
Control System firmware version.
Follow the screen prompts.
Update from USB: Tap this button to
display the Select Firmware File for
Update screen. Using the Up/Down
arrows, locate the Update file (.pfw).
Tap the file name to begin the update.
Update from Panel: Tap this button to
update the update the current firmware
to a newer or earlier version from a
USB device installed in the Outdoor
Control Panel, Indoor Control Panel,
Wireless Remote. Follow the screen
prompts.
System Diagnostic Information:
Displays the IntelliCenter Control
System diagnostic information.
Detected Hardware: Displays the
IntelliCenter™ Control System Panel
Type OCP and Personality Card
installed): Panel type, and model type
(installed Personality Card(s), optional
modules). Tap Detected Hardware,
then OCP 0 information bar to display
installed hardware information.
To Next Page
Loading...
Need help?
General
