4
1
iS4 Settings: From the iS4 Overview
screen. Tap Settings to display iS4
setting options.
Remote Type: The Remote Type is
assigned as iS4.
Remote Name: To change the name,
tap the Remote Name button. Enter the
new name and tap Check to save.
Affiliated Body: Tap the Affiliated Body
of water button. Select Spa (or Pool).
Tap Return to save.
Affiliated Pump: Tap the Affiliated
Pump circuit button (Select Pump (iS4
screen). Select the pump circuit that is
assigned to the iS4 remote. Tap Check
to save. See Pump on page 62 to
assign pump circuits.
Enable Remote: Tap the Enable
Remote ON/OFF button to turn the
remote ON or OFF.
Button Assignments (1-4): Tap Button
1, then tap the Unassigned button
and choose a circuit function for the
selected button. Repeat this step
for buttons 2-4. The available AUX
circuits displayed are assigned in the
Circuits option screen, see page 56
(AUX Circuits and Feature Circuits,
see, Settings > Advanced System
Configuration > Installation Setup >
Circuits).
Delete Remote: From Remotes screen
tap the Trash Can icon, select the
remotes to delete and tap Check. Tap
Yes to delete the selected remotes.
Note. The iS4 remote (P/N 521885)
requires a wired RS-485 connection to
a COM port on main circuit board in the
load center.
To Next Page
Loading...
Need help?
General
