IntelliCenter Control System User’s Guide
| 51
Delete Circuits: Tap Feature Circuits, tap the Trash icon, select the circuit(s)
to delete, then tap X to delete the circuit(s) and exit to the previous screen.
Feature Circuits Overview
Up to 32 individual Feature Circuits can be configured to combine various circuits
together to a single ON/OFF button so that they can be turned on or off at one time.
For example, you could create a Feature Circuit that would turn on the spa, spa
light, fountain, and fountain light, and patio lights all from one button in the Feature
screen (Home screen). Feature Circuits can be setup to control equipment which
is not controlled by an AUX circuit such as pumps and lights. Use Feature Circuits
to control multiple valve actuators, a dual speed pump (turn on high speed), or a
spa spillway effect (in a pool spa combination, all of the pool water can be diverted
to the spa then spill back into the pool). To create a Feature Circuit, first assign the
Feature Circuit a name, then assign the circuit a function (Circuit Function).
Restore Factory Defaults: Use this feature to overwrite the system configuration
with the default factory settings. Follow the screen prompts.
Guest Security Settings: Displays the guest user(s) that have been assigned a
passcode and access to system sections (0 to 24).
Tap 0 /24 Selections to access the next screen to allow the Guest to access 0 to 24
system settings.
Groups (Feature Circuits (Generic or Spillway) (Settings)
System Reboot (Settings)
Tap the System Reboot button to reset the system (applies to Outdoor, Indoor
Control Panels and Wireless Remotes. Immediately after tapping System Reboot
a message screen is displayed to confirm that you wish to reset the system. If you
want to stop the system reset, there is a five second delay in which you can cancel
the system reset. Tap cancel to stop the system reset.
This feature has the same system reset function using the Reset Button on the
Wireless Remote cradle, and on the front of the Indoor or Outdoor Control Panel.
See page 35.
To Next Page
Loading...
Need help?
General
