Pentair INTELLICENTER User Manual

IntelliCenter Control System User’s Guide
| 17
Lights (Groups) Continued
Light Groups
Lights Group 1
All Lights OFF
Landscape LT Grp
Waterfall LT Grp
Individual Groups
Color Set: Tap this momentary button to activate (Green light on) to set the
default color for each light then stop the light on one of the selected eight
(8) colors.
Sync (SAm Color Swim effect): Tap this momentary button to synchronize
(Green light on) all IntelliBrite lights in the group. The Light in the group
will go to the beginning of the SAm rotation. After 21 seconds the lights will
start rotating eaach time the button is tapped.
Note: Also this feature also works for indivdual legacy SAm lights).
Swim (SAm Color Swim effect): Tap this momentary button to activate
(Green light on) an effect of moving colors across the pool. From the Swim
Settings Delays screen set a delay between the lights so that the first light
syncs and starts rotating, then the second light starts rotating after that,
and the third light rotates after that with a delay between the lights.
3
Included Lights
All Yard LightsGroup Name
Color Sengs
0hr. 0min.
Egg Timer
Edit (Pencil): Display the Light
Settings screen.
Lights in Groups: Displays the
light circuit name and color. Note: All
light will display the same color if All
Light Same Color is enabled (ON) from
the Group Settings screen. To display
different fixed colors for each light,
select All Light Same Color (OFF).
To change the light color or the light delay (from 0 to 60): Tap Settings > Groups.
Select the group of lights to change. Tap Color Settings. Set the delays between
the lights from 0 to 60 sec.
The Light Groups Sync, Swim and Set SAm feature are configured from
Settings > Groups. The SAm feature supports IntelliBrite
®
, ColorCascade
®
,
GloBrite
®
Light (Color and White), and MagicStream
®
lights. For more information
about creating light groups, see page 49. From the Groups screen, light groups
can be added, and each light color and delay (0 to 60 seconds) from the Groups
screen. Select the group of lights to change. Tap Color Settings. Set the delays
between the lights from 0 to 60 sec.
Beach Light
Select Circuit to Edit
Delay 0s
White
Back Yard Light
Delay 15s
Light Green
Pool Light
Delay 25s
Green
Pool Light 2
Delay 35s
Cyan
Spa Light
Delay 55s
Blue

Pentair INTELLICENTER Specifications

General

Expandable	Yes
Energy Management	Yes
Touchscreen Display	Yes
Remote Access	Yes, via Mobile App
User Interface	Touchscreen
Remote Monitoring	Yes
Number of Circuits	Up to 40
Wireless Connectivity	Yes
Power Requirements	120V AC
Enclosure Rating	NEMA 3R