AUX Circuits: Tap AUX Circuits to
display the available AUX circuits to
assign a function.
AUX Circuits: Tap the AUX Circuit
(Function name) to assign a function to
the circuit.
Create individual (AUX) Circuits or
Group of Circuits (4 Dots Icon): Tap
this icon on right side of the screen to
create Groups of circuits. Note: For
more about Groups (in Settings), see
page 48.
See page 58 for Feature Settings.
Circuit Function: Assign the circuit
function. For a complete list of Circuit
Functions, see page 60.
Circuit Name: Select one of the
displayed circuit names and tap Check
to save. For a complete list of Circuit
Names see page 61. To customize
a circuit name, tap on the keyboard
icon on the right side of the screen and
enter the new name.
Visible in Features (Lights and
Generic Circuits only): Select ON
to display this circuit in the Home,
Features screen, see page 8.
Freeze Protection: Assign freeze
protection for this circuit. See page
59 for details.
Circuits
Circuit Funcon
Pool
YesFreeze Protecon
YesVisible in Features
Circuit Funcon
Egg Timer: Tap the Egg Timer button to
display the Hours and Minutes button. Tap
the Hours and Minutes button to select
a manual time-out from 0 to 23 hrs. 59
mins. for the circuit. The Egg Time is a
specified time delay (hrs/mins) for the
circuit, once it is turned on manually.
Don't Stop: Tap the Hours button until 23
hours is displayed, then tap the button
again to display Do Not Stop. The Do Not
Stop feature will continuously run the
circuit until the it is manually turned off.
To Next Page
Loading...
Need help?
General
