Sewing
Radiant Stitches
Radiant stitches are an Exclusive Pfaff sewing technique.
These stitches have a built in stop allowing you to sew a
line of stitches in any shape. Make beautiful necklines or
pocketlines on garments.
1. Draw a line, using a marking pen, on your fabric
where you want the stitch to be placed. Attach the
2A foot.
2. Place the fabric and stabilizer underneath the presser
foot.
3. Activate Needle Down function.
4. Line up the center marking of the presser foot with
the drawn line.
5. Touch Start/Stop and sew until the machine stops.
The next time you touch Start/Stop the machine will
sew backwards.
6. Turn the fabric so that the two side markings on the
foot matches the drawn line. Touch Start/Stop and
sew until the machine stops.
7. Repeat step 4–6 until you have reached the desired
length.
Lace Edge Stitches
Sew beautiful Lace Edge stitches on your projects using
the Bi-Level Guide Foot and water soluble stabilizer.
1. Attach the Bi-Level Guide Foot and engage the
IDT™.
2. Fold the fabric and place water soluable stabilizer
underneath, making sure that the stabilizer extends
outside the folded fabric edge.
3. Let the folded fabric edge follow the guide of the
foot. Sew as long as you want the lace to be and
remove it from the sewing machine.
4. Dissolve the water soluable stabilizer in lukewarm
water.
Optional Feet Stitches
Optional Feet Icon
This subcategory includes special stitches for sewing
techniques such as candlewicking, beading stitches and
edge stitches. These techniques require special presser
feet and accessories.
Note: Touch Quick Help and then touch the selected stitch in
the stitch selection area to find out which special presser foot
is required for that stitch.
101
To Next Page
Loading...
Need help?
General
