Preparations
Getting Started with WiFi and
mySewnet™ Cloud
Follow the steps below to connect your machine.
Connect to a Network with WiFi
WiFi icon
Touch the WiFi button in the top left corner of the
screen. Select from the list of available networks. If your
network is password protected, you will be prompted to
enter the password to connect.
For more information, see WiFi Introductionthe built-in
user’s guide.
Connect to mySewnet™ Cloud
mySewnet™ cloud icon
When you have established a WiFi connection, touch the
mySewnet™ tab and touch the Sign in button. A web
view opens where you can log in. If you do not have a
user name and password, select Register to create an
account.
For more information, see mySewnet™ Cloudthe built-in
user’s guide.
LED Lights
Your machine has LED lights which distribute the light
evenly over the sewing area and eliminate shadows.
You can adjust the brightness of the light in the settings
menu, see Machine Settings LED work light brightness
in the built-in user’s guide.
Free Arm
To use the free arm, slide off the accessory tray. When
attached, a hook keeps the accessory tray locked to the
machine. Remove the tray by sliding it to the left.
Manual Thread Cutter
There are three manual thread cutters on your machine.
The first one is close to the bobbin winder spindle for
cutting the thread after winding. The thread can be cut
from sides.
The second one is next to the bobbin area for cutting the
bobbin thread after placing the bobbin in the machine.
The third one is on the left side of the machine for
manually cutting top and bobbin threads. Pull both
threads into the cutter from the back to the front and
pull down quickly.
28
To Next Page
Loading...
Need help?
General
