Sewing
and change presser foot height by touching + or — to
increase or decrease presser foot height.
Note: Be careful not to reduce the presser foot height too much.
The fabric must still move freely under the presser foot.
Tie-Off Options
These options allow you program Tie-Off at the
beginning and at the end of a stitch. It is also possible to
program Thread Cut at the end of a stitch.
When touching the Tie-Off icon, three options open to
let you select different functions; Tie-Off Beginning, Tie-
Off End and Thread Cut.
Touch Tie-Off to close Tie-Off options window. Your
settings are shown under Active features in the
information area.
Note: For immediate Tie-Off, use the Tie-Off button, found on
the front of the machine.
Sewing with Tie-Off Options selected
Tie-Off button
Reverse button
• The Tie-Off Beginning will be performed as soon as
you start to sew.
• Press the Reverse button to perform Tie-Off End. The
action indicator lamp will be lit to indicate that the
machine will finish the stitch and do the Tie-Off.
• When a Thread Cut is programmed, the machine will
automatically cut the threads after performing a
stitch. The needle and presser foot will raise.
Note: Stop sewing and press the Reverse button twice to
activate reverse sewing. The reverse indicator lamp will be lit.
No Tie-Off will be performed.
Press the Reverse button when sewing in reverse to activate
Tie-Off End. The action indicator lamp will be lit.
To go back to sewing forward, stop sewing in reverse and
press the Reverse button. No Tie-Off will be performed.
Stitch Repeat
Stitch Repeat makes it possible for you to program an
exact stitch length, it also lets you decide how many
repetitions of a stitch you want to sew.
Read about Stitch Repeat, Patchwork Program and
Single Stitch in the Stitch Repeat chapter.
93
To Next Page
Loading...
