The Multi-Touch Screen
WiFi
1. Indicates WiFi Status
2. WiFi
3. WiFi Signal Strength
4. Firmware Update
Waiting To Be
Installed
5. Firmware Update
Available
6. Indicates mySewnet™
Status
7. mySewnet™ cloud
Touch the WiFi icon to access the WiFi Settings. Select a
network from the list of available networks. If your
network is password protected, you will be prompted to
enter the password.
If you do not get any signal or have a low signal
strength see Troubleshooting.
Read about WiFi in your machine in the WiFi chapter.
mySewnet™
After connecting to WiFi, touch the mySewnet™ Settings
tab, or touch mySewnet™ cloud icon in the Information
Area. Sign in to mySewnet™ account or create a new
mySewnet™ account.
When signed in you will see how much available space
there is in the mySewnet™ cloud.
The synchronization status will be shown with a green
flashing dot in the Information Area.
If your machine can not connect to mySewnet™ cloud or
does not synchronize, see troubleshooting.
Read more about mySewnet™ cloud in the mySewnet™
chapter.
Recommendations
Recommendations are only available in Sewing Mode. It
shows recommendations for the selected stitch
regarding presser foot, IDT ™system, stitch plate,
bobbin case, and/or if stabilizer should be used. It also
shows if you need to change the bobbin case. The
Recommendations Menu can be both expanded and
collapsed by touching the arrow. It is also possible to
hide the entire information area by swiping to the left.
Note: Touch the Information icon to show the information
area again.
68
To Next Page
Loading...
Need help?
General
