Preparations
Pack Away After Sewing
1. Press the ON/OFF switch to "O".
2. Unplug the cord from the wall socket and then from
the machine.
3. Unplug the foot control cord from the machine. Pull
the cord gently and release. The cord will retract into
the foot control.
4. Place all accessories in the accessory tray. Slide the
tray on to the machine around the free arm.
5. Place the foot control in the space above the free arm.
6. Put on the soft cover.
Tip: The user’s guide and power cord can be stored in the back
pocket of the soft cover.
USB Ports
Your machine has two USB ports for connecting USB
devices such as a memory stick. USB plugs can only be
inserted one way – do not force them into the ports! To
remove, carefully pull the USB device out straight.
Note: Make sure that the USB stick you use has the format
FAT32.
Using a USB device
The external device button in file manager is only active
when a device is connected to a machine USB port.
Note: Do not remove the USB device if a loading spinner is
shown on the screen or while the file manager is shown.
Removing the device at that time can damage the files on your
USB device.
27
To Next Page
Loading...
Need help?
General
