Appliqué Creator
Combination Repeat/Duplicate Last
1. Duplicate Last
2. Combination Repeat
Add more designs/stitches onto your shape in two
different ways with the Combination Repeat/Duplicate
Last function.
Touch the Duplicate Last icon to duplicate the last
added design/stitch in the shape.
Touch the Combination Repeat icon to add designs/
stitches to the shape in the same order as the ones
already loaded.
Touch between the – and + to open a keypad to set the
number of designs/stitches you want to add and touch
OK.
Touch OK in the Shape Creator window to load the
design to Embroidery Edit.
Note: Duplicate/delete and enter number of designs/stitches
are not available when shaping an embroidery text. Read
about how to adjust your text while shaping in the
Embroidery Text chapter.
Set Number of Designs/Stitches
If you want to enter the total number of designs/stitches
you want in your shape, touch in the number area
between the – and + to open a keypad. Enter the desired
number of designs/stitches in the keypad and touch OK.
Zoom Options
1. Zoom to All
2. Zoom to Hoop
3. Zoom Slider
Zoom to All will show all the stitches and/or design(s)
in the stitch/design combination. Zoom to Hoop will
adjust the area to fit the selected hoop.
Use the Zoom Slider and move to the right to zoom in
and to the left to zoom out. You will see how much you
have zoomed above the slider.
168
To Next Page
Loading...
Need help?
General
