Embroidery Edit
Zoom Options
1. Zoom to All
2. Zoom to Hoop
3. Zoom Slider
Zoom to all will show all the design(s) in the
embroidery combination. Zoom to hoop will adjust the
embroidery area to fit the selected hoop.
Use the Zoom Slider and move to the right to zoom in
and to the left to zoom out. The percentage of
magnification will be shown above the slider.
Duplicate/Multi Duplicate
Duplicate/Multi Duplicate
Select Duplicate to make a copy of your selected design
(s).
Touch & hold on the Duplicate icon to open a keypad
and enter desired number of copies you want to add.
Delete/Delete All
Delete/Delete All
Touch the Delete icon, and the selected design(s) will be
deleted from the embroidery area. If more than one
design is selected, a pop-up message will appear. Touch
OK to confirm to delete selected designs.
If you touch & hold on the Delete icon a pop-up will
appear to ask if you want to delete all loaded designs
from the embroidery area. Touch OK in the pop-up
message to confirm.
Mirroring
1. Mirror Side to Side
2. Mirror End to End
To mirror a design sideways, select Mirror Side to Side.
To mirror a design lengthwise, select the Mirror End to
End
Move into Hoop
Move Into Hoop
A red frame will surround the embroidery area if a
design is placed outside the hoop area. Select Move Into
Hoop to move any design that is outside the hoop area
into the hoop area. The design will be placed at the
outermost edge of the hoop.
116
To Next Page
Loading...
Need help?
General
