Embroidery Stitch-Out
Hoop Position
Use the Hoop Position options to move the embroidery
hoop to different positions.
Current Stitch Position
Current Stitch Position
When you want to return to the current stitch position
and continue embroidering after you have changed the
hoop position, touch the current stitch position. You can
also press at the Start/Stop button, on the front of the
machine, once to return to the current stitch position
and start the embroidery.
Park Position
Park Position
When you have finished your embroidery, remove the
hoop and select park position. The embroidery arm will
be placed in a position that will allow easy storage. Use
the park position when you need to have a free sewing
space with the embroidery arm out of the way.
Note: Normally the embroidery unit is in park position when
in Embroidery Edit or Sewing Mode.
Trim Position
Trim Position
Trim position will move the hoop towards you, making
it easier to trim threads and fabric for specialty
techniques.
Center Position
Center Position
When you need to remove the hoop, e.g. when changing
a bobbin, touch the Center Position. This will also show
the Center Position of the hoop.
140
To Next Page
Loading...
