Sequence Creator
Sequence Commands
1. Editable Stitch in Green
2. Tie-Off End
3. Cut Command
4. Sequence Commands
5. Tie-Off Beginning
You can insert Tie-Off, Stop and Thread Cut commands
into the sequence. These commands will be included in
the sequence and will always be performed when
sewing it.
Use the Tie-Off command if you want a secure Tie-Off.
You can insert the Tie-Off commands anywhere in the
sequence.
Note: If creating a sequence in embroidery mode, Tie-Off at
the beginning and end will be added automatically, allowing
you to create a sequence in between. The commands can be
removed.
Insert a Stop command if you want the machine to stop.
This is useful for example at the end of the sequence if
you want to sew it only once or to create a sequence in
several rows.
Insert a Thread Cut command if you want the machine
to Tie-Off and Cut the threads and raise the presser foot.
Move the cursor to the position where you want to add
a command. Select it and an icon will be added into the
sequence. This confirms that the command is inserted
and it also shows where the command will be
performed in the sequence.
Note: The commands will appear on the screen in the order
you program them.
True Size
Touch True Size if you want the sequence to return to
it’s original size.
Saving a Sequence
1. Save button
180
To Next Page
Loading...
Need help?
General
