Shape Creator
Scale
Scale locked
Scale unlocked
True Size
With the scale function, you can increase or decrease the
size of the selected shape.
Scale the selected shape by touching one of the scale
handles in the corners of the shape selection frame and
move your finger on the screen.
You can also touch the Scale icon and use the arrows to
adjust the size of the selected shape. The numbers above
the arrows shows current width and height.
By default the proportions are locked. This is indicated
with a closed padlock in the center of the Control Wheel.
Touch the padlock in the center of the Control Wheel to
unlock and activate individual scaling of width and
height.
Combination Repeat/Duplicate Last
1. Duplicate Last
2. Combination Repeat
Add more designs/stitches onto your shape in two
different ways with the Combination Repeat/Duplicate
Last function.
Touch the Duplicate Last icon to duplicate the last
added design/stitch in the shape.
Touch the Combination Repeat icon to add designs/
stitches to the shape in the same order as the ones
already loaded.
Touch between the – and + to open a keypad to set the
number of designs/stitches you want to add and touch
OK.
Touch OK in the Shape Creator window to load the
design to Embroidery Edit.
Note: Duplicate/Delete or Set Number of Designs/Stitches are
not available when shaping an embroidery text. Read about
how to adjust your text while shaping in the Embroidery Text
chapter.
156
To Next Page
Loading...
Need help?
General
