Sewing
Sew On a Button
To sew on a button, remove the presser foot and select
button sewing. The Feed Dogs will automatically be
lowered.
Place the button under the presser foot holder. Use the
Mirroring icon to make sure the holes in the button are
aligned with the swing of the needle and the width is
appropriate for the actual button. If needed change the
width between holes with the Width icons.
If needed, increase or decrease the number of stitches
that will fasten the button on the fabric, using the Stitch
Repetition icon. Start to sew. The machine will sew the
program for you.
Four Direction Sewing
Use the Four Direction stitches for sewing on patches
without having to turn your fabric or for decorative
stitch designs. When selecting a stitch in category 9 and
subcategory 2, the Four Direction stitch is loaded to
sewing mode.
The starting point is marked with an x in the stitch field.
To change direction touch one of the four stitches. When
the desired length is sewn in one direction, select the
new direction by touching one of the four directions.
98
To Next Page
Loading...
Need help?
General
