Sequence Creator
Pop-up Messages in Sequence
Creator
Stitch Cannot be Added in Sequence
Some stitches are not possible to insert in a stitch
sequence, for example buttonholes and special stitch
menus such as 4-Way stitches.
Maximum Number of Stitches Has Been Reached
The stitch you are trying to add will make the stitch
sequence too long. Your stitch sequence can be up to
approximately 500 mm (20”) long and contain up to 199
stitches and commands. If the stitch sequence exceeds
the maximum length this pop-up message will appear.
183
To Next Page
Loading...
