Embroidery Stitch-Out
Step Stitch-by-Stitch
Touch – to step backwards and + to step forward stitch-
by-stitch. Move backwards a few stitches, after the
upper thread breaks or runs out, to ensure that the
thread will be secured. Touch & hold to move through
the stitches more rapidly. The cursor on the screen will
follow the stitches in the embroidery area.
Go to Stitch
Go to Stitch
To go to a particular stitch within the color block, touch
the Step Stitch-by-Stitch icon. A keypad will open,
where you can enter the stitch number. If the number
entered is too large, the machine will move to the last
stitch in the current color block.
ActivStitch™ Technology
Thread metering Thread tension
The control visible in Embroidery Stitch-Out will change
depending on whether the ActivStitch™ technology
feature is active or not in the Embroidery Settings. Use
the controls to adjust the balance between upper thread
and bobbin thread, e.g. when embroidering with
specialty thread. Read more about the ActivStitch™
technology feature in Embroidery Settings.
Zoom Options
1. Zoom to All
2. Zoom to Hoop
3. Zoom Slider
Open the Stitch-Out Progress window to access a Zoom
Slider, Zoom to All and Zoom to Hoop. Move the slider
to the right to zoom in and to the left to zoom out. You
will see how much you have zoomed above the slider.
Zoom to All will show all the design(s) in the
embroidery combination. Zoom to Hoop will zoom to
show the whole hoop on the screen.
141
To Next Page
Loading...
Need help?
General
