Embroidery Edit
True Size
With the scale function, you can increase or decrease the
size of the selected design(s) +/- 20% without changing
the number of stitches.
Scale the selected design(s) by touching one of the scale
handles in the corners of the design selection frame and
move your finger on the screen. When scaling a design
the True Size icon will be enabled. Touch the icon and
use the arrows to scale the design to the default size.
You can also touch the Scale icon and use the arrows to
adjust the size of the selected design(s). The numbers
above the arrows shows current width and height.
By default the proportions are locked. This is indicated
with a closed padlock in the center of the control wheel.
Touch the padlock in the center of the control wheel to
unlock and activate individual scaling of width and
height.
Note: To increase or decrease a design more than 20%, use the
Resize function.
115
To Next Page
Loading...
