Pfaff creative icon User Manual

Shape Creator
Select Spacing
The default setting spaces the objects evenly along the
baseline (placing the same distance between each). You
can select how to place the designs on the baseline. The
gap between the objects can be increased or decreased
by using the slider. The actual gap is shown above the
slider.
Select Line Positioning
You can place the objects on top of the baseline, on the
baseline or under the baseline. The selected positioning
will affect all objects on the shape.
Select Side Positioning
Select which side of the objects that shall be positioned
on the baseline. You can select to place the bottom, top,
right or left side of the objects along the baseline. The
selected setting will affect all objects on the actual shape.
Fixed Design Angle
1. Up Right
2. Curved
Decide how to align the objects on the baseline. Select to
have the objects placed parallel to the baseline or to
keep the current angle. The setting affects all objects on
the shape.
159

Pfaff creative icon Specifications

General

Stitch Width	9 mm
Needle Positions	37
Lighting	LED
USB Port	Yes
Automatic Thread Cutter	Yes
Built-in Memory	Yes
Maximum Sewing Speed	1050 stitches per minute
Connectivity	WiFi, USB
Needle Threader	Fully Automatic
Bobbin Winding	Separate bobbin winding motor
Screen	10.1" Full Color Touch Screen
Weight	15.6 kg