3
9850067 R01 - 2020-2021 GENERAL / GENERAL XP Service Manual
© Copyright Polaris Inc.
3.19
32.Install a new oil filter. Lubricate the seal with engine
oil prior to installation. Add recommended oil to
engine. Additional oil may be required after complete
engine disassembly. Check level after filling and add
oil as needed. Refer to “Engine Oil and Filter
Change” page 2.28 procedure.
33.Bleed the cooling system. Refer to “Cooling System
Bleeding” page 3.91 procedure.
34.Install the seats.
35.Start engine and check for any oil or coolant leaks.
36.Check the engine oil level.
37.Refer customer to “Engine Break-In Period” page
3.8 upon returning vehicle to customer.
ENGINE / COOLING SYSTEM
To Next Page
Loading...
Need help?
General
