Alteon Application Switch Operating System Application Guide
ADC-VX Management
444 Document ID: RDWR-ALOS-V2900_AG1302
Loading Infrastructure Images
The following describes how to load ADC-VX infrastructure images.
To add ADC-VX infrastructure settings
1. Access the Active Switch Configuration Boot menu.
2. Enter gtimg, and enter vx to add the ADC-VX infrastructure settings.
>> Global - Boot Options#gtimg
Enter image type [all|vx|adc]: adc
ADC Application Images:
ID Version Downloaded Image status vADC IDs
-- ------- ---------- ------------ --------
1 17:41:28 Sun Jan 13, 2013 Incompatible -
2 28.1.0.0 12:45:39 Wed Mar 31, 2013 Active 6
3 28.1.0.2 17:41:28 Sun Jan 13, 2013 Active 7
4 28.1.0.3 12:45:39 Wed Mar 31, 2013 Active 10-12
5 28.1.0.4 17:41:28 Sun Jan 13, 2013 Active 15-20
6 28.1.0.5 12:45:39 Wed Mar 31, 2013 Idle 28
7 28.1.0.6 17:41:28 Sun Jan 13, 2013 Idle 1-5
8 -- - -
9 28.3.0.0 17:41:28 Sun Jan 13, 2013 Active 22
10 28.4.0.0 12:45:39 Wed Mar 31, 2013 Idle -
Enter image ID to be replaced: (1-10) 8
Enter hostname or IP address of FTP/TFTP/SCP server: 10.210.31.39
Enter name of file on FTP/TFTP/SCP server: AAS-28.1.0.12--IF-AlteonOS
Enter username for FTP/SCP server or hit return for TFTP server:
>> Global - Main# /boot
------------------------------------------------------------
[Boot Options Menu]
single - Switch between ADC-VX and Standalone
vadc - Restart selected vADC process
dimage - Select default image
image - Select software image to use on next boot
conf - Select config block to use on next boot
gtimg - Download new software image via FTP/TFTP/SCP
reset - Reset switch
cur - Display current boot options
logen - Enable/Disable Enhanced Log Size
To Next Page
Loading...
