Radware Alteon User Manual

Alteon Application Switch Operating System Application Guide
Accessing Alteon
Document ID: RDWR-ALOS-V2900_AG1302 49
5. Specify the community string used in the traps using the community table.
SNMPv2 Trap Host
The SNMPv2 trap host configuration is similar to the SNMPv1 trap host configuration. Wherever you
specify the model, specify snmpv2 instead of snmpv1.
SNMPv3 Trap Host
To configure a user for SNMPv3 traps
You can choose to send the traps with both privacy and authentication, with authentication only, or
with neither.
1. Configure an SNMPv3 trap host the access table as follows:
>> # /cfg/sys/ssnmp/snmpv3/comm 10
(Select the community table)
>> SNMPv3 snmpCommunityTable 10 # index v1trap
>> SNMPv3 snmpCommunityTable 10 # name public
>> SNMPv3 snmpCommunityTable 10 # uname v1trap
/cfg/sys/ssnmp/snmpv3/usm 10
name "v2trap"
/cfg/sys/ssnmp/snmpv3/access 10
name "v2trap"
model snmpv2
nview "iso"
/cfg/sys/ssnmp/snmpv3/group 10
model snmpv2
uname v2trap
gname v2trap
/cfg/sys/ssnmp/snmpv3/taddr 10
name v2trap
addr 50.81.25.66
taglist v2trap
pname v2param
/cfg/sys/ssnmp/snmpv3/tparam 10
name v2param
mpmodel snmpv2c
uname v2trap
model snmpv2
/cfg/sys/ssnmp/snmpv3/notify 10
name v2trap
tag v2trap/cfg/sys/ssnmp/snmpv3/comm 10
index v2trap
name public
uname v2trap
>> # /cfg/sys/ssnmp/snmpv3/access <x> /level
Enter new access level [noAuthNoPriv|authNoPriv|authPriv]:
access-level>
>> # /cfg/sys/ssnmp/snmpv3/tparam <snmpTargetParams number: (1-16)>

Radware Alteon Specifications

General

Model	Alteon
Manufacturer	Radware
Layer	Layer 4-7
Type	Application Delivery Controller (ADC)
Features	Load balancing, SSL offloading, application acceleration, DDoS protection
Form Factor	Virtual Appliance