Radware Alteon - Page 822

Alteon Application Switch Operating System Application Guide
Content-Intelligent Server Load Balancing Not Using Layer 7 Content Switching Rules
822 Document ID: RDWR-ALOS-V2900_AG1302
3. Configure Filter 2.
>> Filter 1 # proto tcp
(For TCP protocol traffic)
Enter protocol or any: udp
Pending new protocol: tcp
>> Filter 1 # dport http
(To destination port HTTP)
Current destination port or range: any
Pending new destination port or range: http
>> Filter 1 # action redir
(Redirect the traffic)
Current action: allow
Pending new action: redir
>> Filter 1 # /cfg/slb/filt/adv/layer7
(Access the Advanced Layer 7 menu)
>> Layer 7 Advanced# addrd
Enter filtering string ID (1-1024) to redirect
from:
2 (Redirect string 2...)
Enter filtering string ID (2-1024) to redirect
to:
3 (to string 3)
>> /cfg/slb/filt 2
>> Filter 2 # sip 10.46.6.0.0
Current source address: any
New pending source address: 10.46.6.0.0
>> Filter 2 # smask 255.255.255.0
Current source mask: 0.0.0.0
New pending source mask: 255.255.255.0
>> Filter 2 # proto tcp
Enter protocol or any: udp
Pending new protocol: tcp
>> Filter 2 # dport http
Current destination port or range: any
Pending new destination port or range: http
>> Filter 2 # action redir
Current action: allow
Pending new action: redir
>> Filter 2 # /cfg/slb/filt/adv/layer7
>> Layer 7 Advanced# addrd
Enter filtering string ID (1-1024) to redirect from: 2
Enter filtering string ID (2-1024) to redirect to: 4