R&S FSPN - Page 420

Remote Control
R&S
®
FSPN
420User Manual 1179.4363.02 ─ 01
REAL
Floating-point numbers (according to IEEE 754) in the "definite
length block format".
<BitLength> Length in bits for floating-point results
16
16-bit floating-point numbers.
Compared to REAL,32 format, half as many numbers are
returned.
32
32-bit floating-point numbers
For I/Q data, 8 bytes per sample are returned for this format set-
ting.
64
64-bit floating-point numbers
Compared to REAL,32 format, twice as many numbers are
returned.
Example:
FORM REAL,32
FORMat:DEXPort:CSEParator <Separator>
This command selects the column separator for exported trace data.
The selected value is not affected by a preset. The command therefore has no reset
value.
Parameters:
<Separator> COMMa
Selects a comma as a separator.
SEMicolon
Selects a semicolon as a separator.
TAB
Selects a tabulator as a separator.
*RST: n/a
Example: //Select column separator
FORM:DEXP:CSEP TAB
Manual operation: See "Column Separator" on page 161
FORMat:DEXPort:DSEParator <Separator>
This command selects the decimal separator for data exported in ASCII format.
Parameters:
<Separator> POINt | COMMa
COMMa
Uses a comma as decimal separator, e.g. 4,05.
Common Analysis and Display Functions