R&S FSPN - Page 496

Remote Control
R&S
®
FSPN
496User Manual 1179.4363.02 ─ 01
SYSTem:LXI:MDEScription <Description>
This command defines the "LAN" instrument description.
Parameters:
<Description> String containing the instrument description.
SYSTem:LXI:PASSword <Password>
This command defines the "LAN" password.
Parameters:
<Password> String containing the password.
Manual operation: See "LAN Password" on page 288
SYSTem:PSA:WIDeband
<State>
This command defines which option is returned when the *OPT? query is executed,
depending on the state of the wideband option.
It is only available for PSA89600 emulation.
Parameters:
<State> ON | OFF | HIGH
OFF
The option is indicated as "B7J"
ON
The 40 MHz wideband is used.
The option is indicated as "B7J, 140".
HIGH
The 80 MHz wideband is used.
The option is indicated as "B7J, 122".
*RST: OFF
Manual operation: See "Wideband" on page 286
SYSTem:SHIMmediate:STATe <State>
Determines when the remote commands that change hardware settings on the
R&S FSPN are executed.
Regardless of this setting, the firmware automatically sets the hardware when a sweep
is started.
This setting is not changed by the preset function.
Parameters:
<State> ON | OFF | 0 | 1
Configuring the R&S FSPN