RFL Electronics 9780 - Page 263

RFL 9780 16 - 13 RFL Electronics Inc.
April 8, 2003 (973) 334-3100
4. Type in the current time (in 24-hour “hh:mm:ss format, the seconds are optional), and then press
the [ENTER] key.
The Time parameter will be re-displayed, set to the new value.
051 Time 16:10:00
IRIG-B values will override entry here
Again note the message that the IRIG-B input can override the manually entered time.
5. Enter the "SV" command to save your new system label:
9780TxRx-P>SV
Example 2: Editing the Channel 1 frequency setting.
1. Enter the number for the Channel 1 frequency parameter (53) on your terminal or PC keyboard,
and then press the [ENTER] key.
The Channel 1 frequency parameter will be displayed, with information about its
setting below it.
053 Freq Ch1 (Hz) 170000
[30000 - 537500]> _
2. Type in the desired frequency (for example: 190000), and then press the [ENTER] key.
The Channel 1 frequency will be re-displayed, set to the new value.
053 Freq Ch1 (Hz) 190000