No.
Definition
Symptom Possible Cause/Countermeasure
The unexpected error occurs when the
modem (Cumin-M) tries to call the center
with a dial up connection.
• Software bug.
-002 D
Program execution error
Same as SC651-001. • Software bug.
670 B
Engine startup error
Just after the main power is turned on or
the machine is recovering from auto off
mode, the engine ready signal assertion
fails.
Just after the main power is turned on, the
engine does not respond.
• Poor connection between the BICU
and controller board
• Defective BICU
• Defective controller board
672 B
Controller-to-operation panel communication error at startup
After powering on the machine,
communication between the controller
and operation panel does not begin, or
the communication is interrupted after a
normal startup.
• Controller stalled
• Controller board installed incorrectly
• Defective controller board
• Operation panel connector loose or
defective
• Poor connection of DIMM and
optional boards on the controller
board
1. Check the setting of SP5875-001. If
the setting is set to "1 (OFF)", change
it to "0 (ON)".
SC8xx
No.
Definition
Symptom Possible Cause/Countermeasure
819 Kernel stop
[0696e] B
Process error
4. Troubleshooting
118
To Next Page
Loading...
